Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2003 Nissan-Datsun Sentra SE-R Spec V
Quick Lookups: Fluids
2003 Nissan-Datsun Sentra SE-R Spec VSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 6.00 OZS. | 0.17 L | PAG 100 | S | |||
| Air Cond Refrigerant | 1.21 LBS. | 0.54 KG | R-134a | S | |||
| Automatic Transmission Fluid | 2.5L Eng | 9.00 QTS. | 8.51 L | Genuine NISSAN Automatic Transmission Fluid Matic D | S | ||
| Brake Fluid | N/A | N/A | Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DOT 3 | S | |||
| Engine Coolant | 2.5L Eng,Standard Trans | 6.50 QTS. | 6.15 L | 50/50 mixture of Ethylene Glycol Base Antifreeze and water | S | ||
| Engine Oil | 2.5L Eng | Drain and Refill,w/Filter | 4.13 QTS. | 3.9 L | API - SAE 5W-30 | API - SAE 5W-30 viscosity oil is preferred for all temperatures. SAE 10W-30 or SAE 10W-40 viscosity oils may be used if the ambient temperature is above 0Deg.F (-18Deg.C). | S |
| Engine Oil | 2.5L Eng | Drain and Refill,w/o Filter | 3.88 QTS. | 3.67 L | API - SAE 5W-30 | API - SAE 5W-30 viscosity oil is preferred for all temperatures. SAE 10W-30 or SAE 10W-40 viscosity oils may be used if the ambient temperature is above 0Deg.F (-18Deg.C). | S |
| Fuel Tank | 13.25 GALS. | 50.15 L | S | ||||
| Manual Transmission Fluid | 2.5L Eng | 2.38 QTS. | 2.25 L | Genuine NISSAN Manual Transmission Fluid (MTF) HQ Multi, SAE 75W-85 or API - GL-4, SAE 75W-85 | S | ||
| Power Steering Fluid | 1.10 QTS. | 1.04 L | Genuine NISSAN Power Steering Fluid II or equivalent | S | |||
| Windshield Washer Fluid | 3.70 QTS. | 3.5 L | Genuine NISSAN Windshield Washer Concentrate Cleaner and Antifreeze or equivalent | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.