Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSNISSAN-DATSUN2003FRONTIER BASE, STANDARDREPAIR AND DIAGNOSISELECTRICALCHARGING SYSTEMSGENERATORS & REGULATORSGENERATOR SPECIFICATIONS
2003 Nissan-Datsun Frontier Base, Standard
Generator Specifications
2003 Nissan-Datsun Frontier Base, StandardSECTION Generator Specifications
GENERATOR SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Generator Model | LR1100-736, HITACHI | |
| Nominal Rating | 12 Volts, 100 Amps | |
| Ground Polarity | Negative | |
| Minimum RPM Under No Load (With 13.5 Volts Applied) | 1000 RPM | |
| Hot Output Current (With 13.5 Volts Applied) | ||
| At 1300 RPM | 24 Amps | |
| At 2500 RPM | 71 Amps | |
| At 5000 RPM | 98 Amps | |
| Regulated Output Voltage | 14.1-14.7 Volts | |
| Minimum Brush Length | .236 in. (6.00 mm) | |
| Brush Spring Pressure | 3.60-8.82 ozs. (1.000-2.452 N) | |
| Slip Ring Minimum Outer Diameter | 1.024 in. (26.00 mm) | |
| Rotor (Field Coil) Resistance | 2.7 Ohms | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.