1994 Nissan-Datsun Sentra SE-R, StandardFACTORY OEM SERVICE PROCEDURE

Radiator Cooling Fans: Notes

The ECM controls radiator cooling fan(s) based on vehicle speed, engine coolant temperature and A/C switch position. The following tables list correct cooling fan operation based on certain conditions. See appropriate A/C SWITCH ON or A/C SWITCH OFF table. If cooling fan does not operate as specified, see appropriate RADIATOR (COOLING) FAN CONTROL TEST.

A/C SWITCH ON (1.6L)

Engine Coolant Temp. °F (°C) Vehicle Speed MPH Radiator Fan
Less Than 202 (94) 50 Or More Off
" 49 Or Less Low
203-210 (95-99) All Speeds Low
Greater Than 212 (100)
Automatic Transmission All Speeds High
Manual Transmission All Speeds Low
A/C SWITCH OFF (1.6L)

Engine Coolant Temp. °F (°C) Vehicle Speed MPH Radiator Fan
Less Than 195 (90) All Speeds Off
196-201 (91-94) 12 Or More Off
" 11 Or Less Low
203-210 (95-99) 50 Or More Off
" 49 Or Less Low
Greater Than 212 (100)
Automatic Transmission All Speeds High
Manual Transmission All Speeds Low
A/C SWITCH ON (2.0L A/T)

Engine Coolant Temp. °F (°C) Vehicle Speed MPH (1) Radiator Fan
Less Than 202 (94) 50 Or More Off
" 49 Or Less Low
203-210 (95-99) All Speeds Low
212-219 (100-104) 11 Or Less Low
" 12 Or More High
Greater Than 220 (105) All Speeds High
(1) Radiator cooling fan will operate at high speed if engine (coolant) temperature sensor is defective.
A/C SWITCH OFF (2.0L A/T)

Engine Coolant Temp. °F (°C) Vehicle Speed MPH Radiator Fan
Less Than 202 (94) All Speeds Off
203-210 (95-99) All Speeds Low
212-219 (100-104) 11 Or Less Low
" 12 Or More High
Greater Than 221 (105) All Speeds High
A/C SWITCH ON (2.0L M/T)

Engine Coolant Temp. °F (°C) Vehicle Speed MPH Radiator Fan
Less Than 202 (94) 50 Or More Off
" 49 Or Less On
203 (95) Or More All Speeds On
A/C SWITCH OFF (2.0L M/T)

Engine Coolant Temp. °F (°C) Vehicle Speed MPH Radiator Fan
Less Than 202 (94) All Speeds Off
203-210 (95-99) 11 Or Less Off
" 12 Or More On
Greater Than 212 (100) All Speeds On
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.