Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1991 Nissan-Datsun Sentra SE-RFACTORY OEM SERVICE PROCEDURE
Pressure Test
- Start engine and warm to normal operating temperature. Release fuel pressure by removing fuel pump fuse (fuel pump relay on 300ZX). Restart engine. After engine stalls, crank engine 2-3 times to completely release fuel pressure.
- On all models, disconnect distributor center cable (crank angle sensor on 300ZX). Check compression pressure with all spark plugs removed, throttle valve wide open and engine at specified cranking speed.
- Crank engine at least 6 revolutions to determine engine compression. Compression reading should be within specification. See ENGINE COMPRESSION TABLE. After servicing engine, turn ignition off and reconnect disconnected components. Erase memory Code 22 (if necessary).
ENGINE COMPRESSION
| Model | Standard psi (kg/cm2 ) | Minimum psi (kg/cm2 ) | Minimum RPM | |
|---|---|---|---|---|
| Maxima | 173 (12.0) | 128 (9.0) | 300 | |
| NX & Sentra | ||||
| 1.6L | 192 (13.5) | 164 (11.5) | 350 | |
| 2.0L | 178 (12.5) | 149 (10.5) | 300 | |
| Pathfinder & Pickup | ||||
| 4-Cyl. | 192 (13.5) | 142 (10.0) | 300 | |
| V6 | 173 (12.0) | 128 (9.0) | 300 | |
| Stanza | 175 (12.3) | 146 (10.3) | 250 | |
| 240SX | 179 (12.6) | 151 (10.6) | 300 | |
| 300ZX | ||||
| Non-Turbo | 186 (13.1) | 142 (10.0) | 300 | |
| Turbo | 173 (12.0) | 128 (9.0) | 300 | |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.