Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2018 Mitsubishi Outlander LE, AWDFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 3.80 OZS. | 0.11 L | PAG 56 | S | |||
| Air Cond Refrigerant | 1.20 LBS. | 0.54 KG | HFO-1234yf (R-1234yf) | S | |||
| Automatic Transmission Fluid | Automatic CVT Trans | 7.30 QTS. | 6.9 L | DIA QUEEN CVTF-J4 | S | ||
| Brake Fluid | N/A | N/A | DOT 3 or DOT 4 Brake Fluid | As required. | S | ||
| Differential Gear Oil | Rear | 0.42 QTS. | 0.39 L | API - GL-5, SAE 80W Hypoid Gear Oil | S | ||
| Engine Coolant | 2.4L Eng | w/Reserve Tank | 6.34 QTS. | 5.99 L | DIA QUEEN super long life coolant premium or equivalent | High quality ethylene glycol based non-silicate, non-amine, non-nitrate and non-borate coolant with long life hybrid organic acid technology. Reserve tank: 0.69 qt. | S |
| Engine Oil | 2.4L Eng | w/Filter | 4.86 QTS. | 4.59 L | ILSAC, API - SAE 0W-20 | SAE 0W-20 engine oil is strongly recommended for optimum fuel economy and cold starting. If it's not available the ILSAC certification oil of other viscosity grades can be used temporarily. | S |
| Engine Oil | 2.4L Eng | w/o Filter | 4.54 QTS. | 4.29 L | ILSAC, API - SAE 0W-20 | SAE 0W-20 engine oil is strongly recommended for optimum fuel economy and cold starting. If it's not available the ILSAC certification oil of other viscosity grades can be used temporarily. | S |
| Fuel Tank | AWD | 15.80 GALS. | 59.8 L | S | |||
| Transfer Case Fluid | w/o S-AWC | 0.50 QTS. | 0.47 L | API - GL-5, SAE 80W Hypoid Gear Oil | S | ||
| Transfer Case Fluid | w/S-AWC | 0.48 QTS. | 0.45 L | API - GL-5, SAE 80W Hypoid Gear Oil | S | ||
| Windshield Washer Fluid | 4.80 QTS. | 4.54 L | Use commercially-available windshield washer fluid only. | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.