2014 Mitsubishi Lancer Evolution GSRFACTORY OEM SERVICE PROCEDURE

Removal And Installation

WARNING: This page is about a different car, the 2014 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Hands Free Module
G09667303Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.


For the USB cable removal and installation procedures, refer to REMOVAL AND INSTALLATION .



For the USB adapter removal and installation procedures, refer to REMOVAL AND INSTALLATION .



For the steering wheel remote control switch removal and installation procedures, refer to STEERING .



For the microphone unit removal and installation procedures, refer to DOME LIGHT .

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.