2012 Mitsubishi Lancer Evolution MRFACTORY OEM SERVICE PROCEDURE

Removal And Installation: Notes

WARNING: For removal and installation of the passenger's side air bag module, always observe the service procedures described in AIR BAG MODULE AND CLOCK SPRING .

The following bolts and screws are used for installing the instrument panel. Bolts and screws are indicated as marks shown in the illustration in the sections of "Removal and Installation" and "Disassembly and Assembly."

BOLTS AND SCREWS REFERENCE CHART

Name Symbol Size (D x L) mm Color Shape
Tapping screw a 5 x 12 -
G05102804Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
b 5 x 16 -
c 5 x 12 -
G05384591Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Bolt with washer d 5 x 20 -
G05102809Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
e 6 x 16 -
G05384593Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
D: Thread diameter, L: Effective thread length
CAUTION:
  • Refer to SRS SERVICE PRECAUTIONS and AIR BAG MODULE AND CLOCK SPRING before removing the passenger side air bag module.
  • Do not subject the SRS-ECU to any shocks when removing or installing the instrument panel.
    Fig 1: Removal & Installation Of Instrument Panel Assembly With Torque Specifications
    G06677970Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.