2012 Mitsubishi Lancer Evolution MRFACTORY OEM SERVICE PROCEDURE

Vehicle Identification Number Plate

The vehicle identification number (VIN) plate is located on a plate attached to the left top side of the instrument panel.

Fig 1: Identifying Vehicle Identification Number Plate
G05392208Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

CODE CHARTΒ 

Fig 2: Using Vehicle Identification Number Plate
G00505475Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
CODE CHART

No. Item Content
1 Country J JAPAN
2 Make A Mitsubishi Motors
3 Vehicle type 3 Passenger car
4 Others 2 Air bags (driver, passenger, side curtain, driver knee)
5 Line W LANCER EVOLUTION
6 Trim level (Price class) 5 PREMIUM
8 SPORTS
7 Body style F 4-door sedan
8 Engine type V 2.0L DOHC MIVEC with charge air cooler, turbocharger (4B11)
9 Check digits(1) 0, 1, 2, 3, ----9, X
10 Model year C 2012 year
11 Plant U Mizushima
12 Serial number 000001 to 999999
(1) Check digit means a single number, or letter X, used to verify the accuracy of transcription of vehicle identification number.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.