Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2012LANCER EVOLUTION GSRREPAIR AND DIAGNOSISELECTRICALGAUGESCOMBINATION METER - LANCER EVOLUTIONTROUBLESHOOTINGSERVICE DATA
2012 Mitsubishi Lancer Evolution GSR
Service Data
2012 Mitsubishi Lancer Evolution GSRSECTION Service Data
NOTE:
For some information result read out by the ECU, the specific items may not be displayed.
SERVICE DATA CHART
| Item No. | Check item | Check condition | Normal condition |
|---|---|---|---|
| 01 | Illumination | Taillight: Illuminates | ON |
| Taillight: OFF | OFF | ||
| 25 | ASC/TCL failure indicator | Indicator illuminates | ON |
| Indicator is extinguished | OFF | ||
| 80 | Speed meter | Speedometer displayed value and scan tool displayed value agree with each other. | |
| 87 | Tachometer | Tachometer displayed value and scan tool displayed value agree with each other. | |
| 89 | Fuel gauge | Fuel gauge unit resistance value and scan tool displayed value agree with each other. (Tolerance is ±2 Ω) | |
| 8A | Fuel gauge (Target) | Fuel gauge and scan tool displayed values agree with each other. | |
| 90 | Odometer | Odometer displayed value and scan tool displayed value agree with each other. | |
| 91 | Rheostat | Lighting change by rheostat switch operation and scan tool displayed change agree with each other. | |
| 92 | Trip meter A | Tripmeter displayed value and scan tool displayed value agree with each other. | |
| 93 | Trip meter B | ||
| 94 | Power source voltage | Always | 5 - 20 V |
| A1 | SRS indicator | Indicator illuminates | ON |
| Indicator is extinguished | OFF | ||
| A2 | ABS indicator | Indicator illuminates | ON |
| Indicator is extinguished | OFF | ||
| A4 | Charge indicator | Indicator illuminates | ON |
| Indicator is extinguished | OFF | ||
| A5 | Check Engine indicator | Indicator illuminates | ON |
| Indicator is extinguished | OFF | ||
| A7 | Brake indicator | Indicator illuminates | ON |
| Indicator is extinguished | OFF | ||
| A8 | Driver seatbelt indicator | Indicator illuminates | ON |
| Indicator is extinguished | OFF | ||
| AA | ASC/TCL Operation indicator | Indicator illuminates | ON |
| Indicator is extinguished | OFF | ||
| AB | ASC/TCL OFF indicator | Indicator illuminates | ON |
| Indicator is extinguished | OFF | ||
| B1 | Turn signal indicator (Right) | Turn-signal light (RH): Illuminates | ON |
| Turn-signal light (RH): OFF | OFF | ||
| B2 | Turn signal indicator (Left) | Turn-signal light (LH): Illuminates | ON |
| Turn-signal light (LH): OFF | OFF | ||
| B3 | Front fog light indicator |
|
ON |
| Fog light is not illuminated | OFF | ||
| B4 | High beam indicator | Dimmer switch: ON | ON |
| Dimmer switch: OFF | OFF | ||
| BA | Position light indicator | Taillight switch: ON | ON |
| Taillight switch: OFF | OFF | ||
| D6 | Head light auto leveling warning | Always | OFF |
| E1 | Tire Pressure indicator | Indicator illuminates | ON |
| Indicator is extinguished | OFF | ||
| F2 | FL corner sensor indicator | Always | OFF |
| F3 | FR corner sensor indicator | Always | OFF |
| F4 | RL corner sensor indicator | Always | OFF |
| F5 | RR corner sensor indicator | Always | OFF |
| F6 | Back corner sensor | Always | OFF |
| F7 | Cruise control indicator | Indicator illuminates | ON |
| Indicator is extinguished | OFF | ||
| F8 | Rear fog light indicator | Always | OFF |
| F10 | Diesel GLOW indicator | Always | OFF |
| F17 | AFS/ACL OFF indicator | Always | OFF |
| F27 | PA. Seatbelt indicator | Always | OFF |
| F29 | Inter cooler spray indicator | Always | OFF |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.