2012 Mitsubishi Galant ESFACTORY OEM SERVICE PROCEDURE

Steering Wheel Sensor

  • This sensor is mounted behind the column switch, and detects the steering wheel angle.
  • The steering wheel sensor has a self-diagnosis function and a memory function. If the diagnosis function finds a trouble, it sends a DTC code to the TCL/ASC-ECU. Then the ECU will illuminate the TCL/ASC indicator.
    NOTE: For the details of the DTC codes, refer to DIAGNOSTIC TROUBLE CODE CHARTΒ .
Fig 1: Steering Wheel Sensor
G06710367Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Chapter Navigation
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.