Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Mitsubishi Eclipse GS, Automatic TransFACTORY OEM SERVICE PROCEDURE
Simplified Wiring System (SWS) DTCS
SIMPLIFIED WIRING SYSTEM (SWS) DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| U1700 | Malfunction in the SWS communication line |
| U1701 | Communication error in the column switch |
| U1702 | Communication error in the front-ECU |
| U1703 | Communication error in the sunroof-ECU or the sunroof not installed |
| U1704 | Communication error in the power window main switch. The diagnostic trouble code is always set, but it does not indicate a problem |
| U1073 | Bus off |
| U1100 | ECM <M/T> or PCM <A/T> time-out (related to engine) |
| U1101 | ECM <M/T> or PCM <A/T> time-out (related to transaxle) |
| U1108 | Combination meter time-out |
| U1110 | A/C-ECU time-out |
| U1111 | Multi center display unit (middle-grade type) time-out. The diagnostic trouble code is always set, but it does not indicate a problem |
| U1128 | Failure information on combination meter |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
