Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Mitsubishi Lancer Evolution MRFACTORY OEM SERVICE PROCEDURE
Vehicles For CANADA
VEHICLE DIMENSION SPECIFICATION
| Item | CZ4AS | ||||
|---|---|---|---|---|---|
| NGFZL3M | MGFZL3M | MPFZL3M | |||
| Vehicle dimension mm (in) | Overall width | 1 | 1,810 (71.3) | 1,810 (71.3) | 1,810 (71.3) |
| Tread-front | 2 | 1,545 (60.8) | 1,545 (60.8) | 1,545 (60.8) | |
| Overall length | 3 | 4,495 (177.0) | 4,495 (177.0) | 4,495 (177.0) | |
| Overhang-front | 4 | 910 (35.8) | 910 (35.8) | 910 (35.8) | |
| Wheelbase | 5 | 2,650 (104.3) | 2,650 (104.3) | 2,650 (104.3) | |
| Overhang-rear | 6 | 935 (36.8) | 935 (36.8) | 935 (36.8) | |
| Ground clearance | 7 | 140 (5.5) | 140 (5.5) | 140 (5.5) | |
| Overall height (unladen) | 8 | 1,480 (58.3) | 1,480 (58.3) | 1,480 (58.3) | |
| Tread-rear | 9 | 1,545 (60.8) | 1,545 (60.8) | 1,545 (60.8) | |
| Vehicle weight kg (lb) | Curb weight | 1,595 (3,517) | 1,620 (3,572) | 1,630 (3,594) | |
| Gross vehicle weight rating | 2,060 (4,542) | 2,060 (4,542) | 2,060 (4,542) | ||
| Gross axle weight rating-front | 1,080 (2,381) | 1,080 (2,381) | 1,080 (2,381) | ||
| Gross axle weight rating-rear | 1,050 (2,315) | 1,050 (2,315) | 1,050 (2,315) | ||
| Seating capacity | 5 | 5 | 5 | ||
| Engine | Model No. | 4B11 | 4B11 | 4B11 | |
| Piston displacement cm3 (cu in) | 1,998 (121.9) | 1,998 (121.9) | 1,998 (121.9) | ||
| Maximum output kW/r/min (HP/r/min) | 217/6,500 (291/6,500) | 217/6,500 (291/6,500) | 217/6,500 (291/6,500) | ||
| Maximum torque N.m/r/min (ft-lb/r/min) | 407/4,000 (300/4,000) | 407/4,000 (300/4,000) | 407/4,000 (300/4,000) | ||
| Fuel system | Fuel supply system | MFI | MFI | MFI | |
| Transaxle | Model No. | W5M6A | W6DGA | W6DGA | |
| Type | 5M/T | TC-SST | TC-SST | ||
| Turning radius m (ft) | 5.9 (19.4) | 5.9 (19.4) | 5.9 (19.4) | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.