2011 Mitsubishi Eclipse GTFACTORY OEM SERVICE PROCEDURE

Service Specifications

SERVICE SPECIFICATION

ITEM STANDARD VALUE
Transmission fluid temperature sensor kΩ at 0°C (32°F) 16.7 - 20.5
at 20°C (68°F) 7.3 - 8.9
at 40°C (104°F) 3.4 - 4.2
at 60°C (140°F) 1.9 - 2.2
at 80°C (176°F) 1.0 - 1.2
at 100°C (212°F) 0.57 - 0.69
Line pressure MPa (psi) 0.98 - 1.05 (142 - 152)
Resistance of torque converter clutch control solenoid valve coil [at 20°C (68°F)] Ω 2.7 - 3.4
Resistance of low-reverse solenoid valve coil [at 20°C (68°F)] Ω 2.7 - 3.4
Resistance of overdrive solenoid valve coil [at 20°C (68°F)] Ω 2.7 - 3.4
Resistance of second solenoid valve coil [at 20°C (68°F)] Ω 2.7 - 3.4
Resistance of underdrive solenoid valve coil [at 20°C (68°F)] Ω 2.7 - 3.4
Resistance of reduction solenoid valve coil [at 20°C (68°F)] Ω <5A/T> 2.7 - 3.4
Stall speed r/min 4A/T 2,500 - 3,000
5A/T 2,200 - 2,700
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.