Name: AllOEMManuals
Address: 316 Brandywine Ave, Streetman, TX, 75859, US
Telephone: +14699867883
Price range: $$

Required Special Tools:

MB991958: Scan Tool (M.U.T.-III Sub Assembly)
- MB991824: V. C.I.
- MB991827: M.U.T.-III USB Cable
- MB991910: M.U.T.-III Main Harness A

CAUTION:

To prevent damage to scan tool MB991958, always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting scan tool MB991958.
When the learning value for MFI engine is initialized, the initial learning value for engine timing chain elongation is also initialized. Thus, the initial learning value for timing chain elongation must be stored in scan tool MB991958 before working. If the initial learning value for timing chain elongation is not stored and the learning value for MFI engine is initialized, the visual check of the timing chain elongation must be carried out (Refer to TIMING CHAIN ELONGATION VISUAL CHECK ). At that time, if the timing chain elongates more than the specified value, the timing chain can possibly interfere the other parts and damage the engine before the ECM detects the timing chain elongation.

Fig 1: Connecting Special Tool MB991827 To Special Tool MB991824 And Personal Computer
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Initialization Procedure