Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Mitsubishi Outlander LS, FWDFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 4.75 OZS. | 0.14 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.20 LBS. | 0.54 KG | R-134a | S | |||
| Automatic Transmission Fluid | 8.90 QTS. | 8.42 L | Automatic Transmission Fluid DIA QUEEN J2 | S | |||
| Brake Fluid | N/A | N/A | DOT 3 or DOT 4 Brake Fluid | As required. | S | ||
| Differential Gear Oil | Rear | 0.53 QTS. | 0.5 L | API - GL-5, SAE 90W Hypoid Gear Oil | Above 10Deg.F (-23Deg.C) SAE90, 85W90, 80W-90, From -30Deg.F (-34Deg.C) to -10Deg.F (-23Deg.C) SAE 80W, 80W-90, Below -30 Deg.F (-34Deg.C) SAE 75W. | S | |
| Engine Coolant | 7.40 QTS. | 7 L | Long Life Antifreeze Coolant or equivalent | S | |||
| Engine Oil | w/Filter | 4.52 QTS. | 4.27 L | API - SAE 5W-20 or 10W-30 | API - SAE 5W-20 engine oil is strongly recommended for optimum fuel economy and cold starting. | S | |
| Engine Oil | w/o Filter | 4.20 QTS. | 3.97 L | API - SAE 5W-20 or 10W-30 | API - SAE 5W-20 engine oil is strongly recommended for optimum fuel economy and cold starting. | S | |
| Fuel Tank | 15.90 GALS. | 60.18 L | S | ||||
| Power Steering Fluid | 1.06 QTS. | 1 L | MITSUBISHI Power Steering Fluid | S | |||
| Transfer Case Fluid | 0.56 QTS. | 0.52 L | API - GL-5, SAE 90W Hypoid Gear Oil | S | |||
| Windshield Washer Fluid | 5.30 QTS. | 5.01 L | Use commercially-available windshield washer fluid only. | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.