Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Mitsubishi Eclipse GS, AutomaticFACTORY OEM SERVICE PROCEDURE
Data List Reference Table: Notes
The following items can be read by the scan tool from the ABS/TCL-ECU input data.
DATA LIST REFERENCE CHART
| MUT-III SCAN TOOL DISPLAY | ITEM NO. | CHECK ITEM | CHECKING REQUIREMENTS | NORMAL VALUE |
|---|---|---|---|---|
| FL wheel speed sensor | 01 | Front-left wheel speed sensor | Drive the vehicle | Vehicle speeds displayed on the speedometer and scan tool are identical. |
| FR wheel speed sensor | 02 | Front-right wheel speed sensor | ||
| RL wheel speed sensor | 03 | Rear-left wheel speed sensor | ||
| RR wheel speed sensor | 04 | Rear-right wheel speed sensor | ||
| Power supply voltage | 05 | ABS/TCL-ECU power supply voltage | Ignition switch power supply voltage and valve monitor voltage | Battery positive voltage |
| Stoplight switch (input) | 06 | Stoplight switch | Depress the brake pedal. | ON |
| Release the brake pedal. | OFF | |||
| TCL OFF switch | 28 | TCL switch | TCL switch: ON | ON |
| TCL switch: OFF | OFF |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.