Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2007 Mitsubishi Eclipse GS, AutomaticFACTORY OEM SERVICE PROCEDURE
Traction Control System: General Description: Features
The traction control system (TCL) is adopted for vehicles with 3.8L engine.
- When a drive wheel is judged to be slipping by some reasons such as excessive accelerator pedal depression on a low friction road, the TCL applies brake force to the slipping drive wheel or lowers the engine output to suppress the drive wheel slippage.
- Fail-safe function ensures safety is maintained
- Diagnostic function provides improved serviceability
- To shorten the lines and enhance data transaxle reliability, communication with other ECU is performed over a CAN (Controller Area Network).
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.