2006 Mitsubishi Lancer ES, AutomaticFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 4.75 OZS. 0.14 L PAG 46 S
Air Cond Refrigerant 1.15 LBS. 0.52 KG R-134a S
Automatic Transmission Fluid ES,O-Z Rally,Ralliart 8.10 QTS. 7.66 L Automatic Transmission Fluid DIAMOND SP III S
Brake Fluid N/A N/A DOT 3 or DOT 4 Brake Fluid As required. S
Engine Coolant ES,Evolution,Evolution MR,Evolution RS,O-Z Rally 6.30 QTS. 5.96 L Long Life Antifreeze Coolant or equivalent S
Engine Oil ES,O-Z Rally w/Filter 4.02 QTS. 3.8 L API - SAE 5W-20, SAE 5W-30 and SAE 10W-30 API - SAE 5W-20, SAE 5W-30 and SAE 10W-30 engine oil can be used in outdoors temperatures ranging from 0Deg to 100Deg (-18 to 38Deg C). However for optimum fuel economy and cold starting select the low SAE viscosity grade oil for the expected temperature range. SAE 5W-20 or SAE 5W-30 engine oil is recommended. S
Engine Oil ES,O-Z Rally w/o Filter 3.70 QTS. 3.5 L API - SAE 5W-20, SAE 5W-30 and SAE 10W-30 API - SAE 5W-20, SAE 5W-30 and SAE 10W-30 engine oil can be used in outdoors temperatures ranging from 0Deg to 100Deg (-18 to 38Deg C). However for optimum fuel economy and cold starting select the low SAE viscosity grade oil for the expected temperature range. SAE 5W-20 or SAE 5W-30 engine oil is recommended. S
Manual Transmission Fluid ES,O-Z Rally,Ralliart 2.30 QTS. 2.17 L DIA QUEEN New Multi Gear Oil. API - GL-3, SAE 75W-80 or API - GL-4, SAE 75W-85W, 75W-90 S
Power Steering Fluid ES,O-Z Rally,Ralliart 1.30 QTS. 1.23 L MITSUBISHI Power Steering Fluid S
Windshield Washer Fluid N/A N/A Use commercially-available windshield washer fluid only. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.