2005 Mitsubishi Lancer EvolutionFACTORY OEM SERVICE PROCEDURE

Fastener Tightening Specification

FASTENER TIGHTENING SPECIFICATION

ITEM SPECIFICATION
TRIMS 
Child restraint fitting bolt 22 +/- 4 N.m (16 +/- 3 ft-lb)
FRONT SEAT ASSEMBLY 
Seatback assembly bolt 22 +/- 3 N.m (16 +/- 2 ft-lb)
Front seat assembly bolt 45 +/- 10 N.m (34 +/- 7 ft-lb)
Front seat assembly nut 30 +/- 5 N.m (22 +/- 4 ft-lb)
Slide adjuster inner bolt 22 +/- 3 N.m (16 +/- 2 ft-lb)
Slide adjuster outer bolt 22 +/- 3 N.m (16 +/- 2 ft-lb)
REAR SEAT ASSEMBLY 
Rear seatback assembly bolt 22 +/- 4 N.m (16 +/- 3 ft-lb)
FRONT SEAT BELT 
Adjustable seat belt anchor bolt 44 +/- 10 N.m (33 +/- 7 ft-lb)
Inner seat belt bolt 44 +/- 10 N.m (33 +/- 7 ft-lb)
Outer seat belt bolt 44 +/- 10 N.m (33 +/- 7 ft-lb)
REAR SEAT BELT 
Center seat blet, inner bolt 44 +/- 10 N.m (33 +/- 7 ft-lb)
Center seat belt, outer bolt 44 +/- 10 N.m (33 +/- 7 ft-lb)
Inner seat belt bolt 44 +/- 10 N.m (33 +/- 7 ft-lb)
Outer seat belt bolt 44 +/- 10 N.m (33 +/- 7 ft-lb)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.