Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2003 Mitsubishi Eclipse RS, Standard
Quick Lookups: Fluids
2003 Mitsubishi Eclipse RS, StandardSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 5.50 OZS. | 0.16 L | PAG 46 | S | |||
| Air Cond Refrigerant | 0.94 LBS. | 0.42 KG | R-134a | S | |||
| Automatic Transmission Fluid | 2.4L Eng | 8.10 QTS. | 7.66 L | Automatic Transmission Fluid DIAMOND SP III | S | ||
| Brake Fluid | N/A | N/A | DOT 3 or DOT 4 Brake Fluid | As required. | S | ||
| Clutch Fluid | N/A | N/A | DOT 3 or DOT 4 Brake Fluid | As required. | S | ||
| Engine Coolant | 2.4L Eng | 7.40 QTS. | 7 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | Includes: .69 qt. in reserve tank. | S | |
| Engine Oil | w/Filter | 4.32 QTS. | 4.08 L | API - SAE 5W-30 | ILSAC certification symbol or conforming to the API - SJ EC, SJ/CD EC. | S | |
| Engine Oil | w/o Filter | 4.20 QTS. | 3.97 L | API - SAE 5W-30 | ILSAC certification symbol or conforming to the API - SJ EC, SJ/CD EC. | S | |
| Fuel Tank | 16.30 GALS. | 61.7 L | S | ||||
| Manual Transmission Fluid | 2.4L Eng | 2.30 QTS. | 2.17 L | API - GL-4, SAE 75W-90, 75W, 85W | S | ||
| Power Steering Fluid | 1.30 QTS. | 1.23 L | Automatic Transmission Fluid DIAMOND | S | |||
| Windshield Washer Fluid | 4.20 QTS. | 3.97 L | Use commercially-available windshield washer fluid only. | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.