Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI2003ECLIPSE RS, STANDARDREPAIR AND DIAGNOSISENGINE PERFORMANCESPECIFICATIONSENGINE CONTROLS - SERVICE & ADJUSTMENT SPECIFICATIONSMECHANICAL CHECKSENGINE COMPRESSION
2003 Mitsubishi Eclipse RS, Standard
Engine Compression
2003 Mitsubishi Eclipse RS, StandardSECTION Engine Compression
Check engine compression with engine at normal operating temperature, all spark plugs removed and throttle wide open.
COMPRESSION PRESSURE
| Application | Pressure - psi (kPa) | |||
|---|---|---|---|---|
| Normal Compression Pressure | ||||
| Diamante | 171 (1179) | |||
| Eclipse | ||||
| 2.4L | 185 (1275) | |||
| 3.0L | ||||
| With Variable Induction Control | 212 (1462) | |||
| Without Variable Induction Control | 119 (824) | |||
| Galant | ||||
| 2.4L | 185 (1275) | |||
| 3.0L | 119 (824) | |||
| Lancer | 234 (1613) | |||
| Montero & Montero Sport | 171 (1179) | |||
| Outlander | 185 (1275) | |||
| Minimum Compression Pressure | ||||
| Diamante | 127 (876) | |||
| Eclipse | ||||
| 2.4L | 139 (959) | |||
| 3.0L | ||||
| With Variable Induction Control | 149 (1027) | |||
| Without Variable Induction Control | 83 (575) | |||
| Galant | ||||
| 2.4L | 139 (959) | |||
| 3.0L | 83 (575) | |||
| Lancer | 170 (1172) | |||
| Montero & Montero Sport | 127 (876) | |||
| Outlander | 139 (959) | |||
| Maximum Variation Between Cylinders | ||||
| All Models | 14 (97) | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.