TP SENSOR ADJUSTMENT SPECIFICATIONS

Application

TP Sensor Terminals No.

⁽¹⁾ Millivolts

Diamante With Traction Control

1 & 3

580-690

Diamante Without Traction Control

1 & 3

⁽²⁾ 400-1000

Eclipse, Eclipse Spyder & Galant

1 & 3

535-735

Mirage 1.5L & Mirage 1.8L Without Cruise Control

2 & 4

⁽³⁾ 400-1000

Mirage 1.8L With Cruise Control

2 & 4

⁽²⁾ 400-1000

Montero

1 & 3

535-735

Montero Sport 3.0L

1 & 3

⁽⁴⁾ 400-1000

Montero Sport 3.5L

1 & 3

535-735

⁽¹⁾	With ignition on and TP sensor in idle position.

⁽²⁾	Test with .055" (1.4 mm) thick feeler gauge inserted maximum .118" (3 mm) deep between throttle lever and free lever.

⁽³⁾	Test with .177" (.45 mm) thick feeler gauge inserted between fixed SAS and throttle lever.

⁽⁴⁾	With Cruise Control, test with .055" (1.4 mm) thick feeler gauge inserted maximum .118" (3 mm) deep between throttle lever and free lever. Without Cruise Control, test with .026" (.65 mm) thick feeler gauge inserted between fixed SAS and throttle lever.

TP SENSOR RESISTANCE SPECIFICATIONS

Application

TP Sensor Terminals No.

⁽¹⁾ k/Ohms

Except Diamante & Mirage

1 & 4

3.5-6.5

1 & 3

⁽²⁾

Diamante

1 & 4

3.5-6.5

3 & 4

⁽²⁾

Mirage

1 & 4

3.5-6.5

2 & 4

⁽²⁾

⁽¹⁾	With TP sensor in idle position.

⁽²⁾	Resistance should smoothly change as throttle is opened.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Throttle Position (TP) Sensor

Use the Manual With the Right Hardware

When to See a Mechanic