TP SENSOR SPECIFICATIONS

Application

TP Sensor Terminals No.

⁽¹⁾ Millivolts

Diamante With Traction Control

3 & 1

580-690

Diamante Without Traction Control

3 & 1

⁽²⁾ 400-1000

Eclipse 2.4L & Galant 2.4L

3 & 1

535-735

Eclipse 3.0L & Galant 3.0L

3 & 1

535-735

Mirage 1.5L

2 & 4

⁽⁴⁾ 400-1000

Mirage 1.8L

2 & 4

⁽²⁾ 400-1000

Montero

3 & 1

⁽³⁾ 400-1000

Montero Sport 3.0L

3 & 1

⁽⁵⁾⁽⁶⁾ 400-1000

Montero Sport 3.5L

3 & 1

535-735

⁽¹⁾

At idle.

⁽²⁾	Test with .055" (1.4 mm) thick feeler gauge inserted maximum .118" (3 mm) deep between throttle lever and free lever.

⁽³⁾	Test with .026" (.65 mm) thick feeler gauge inserted between fixed SAS and throttle lever.

⁽⁴⁾	Test with .018" (.45 mm) thick feeler gauge inserted maximum .118" (3 mm) deep between throttle lever and free lever.

⁽⁵⁾	With Cruise Control, test with .055" (1.4 mm) thick feeler gauge inserted maximum .118" (3 mm) deep between throttle lever and free lever.

⁽⁶⁾	Without Cruise Control, test with .026" (.65 mm) thick feeler gauge inserted between fixed SAS and throttle lever.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Throttle Position (TP) Sensor

Use the Manual With the Right Hardware

When to See a Mechanic

Rather have a pro handle this?