Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1995 Mitsubishi Eclipse GS-T, AutomaticFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 6.50 OZS. | 0.19 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.44 LBS. | 0.65 KG | R-134a | S | |||
| Automatic Transmission Fluid | Turbocharger | 7.10 QTS. | 6.71 L | Automatic Transmission Fluid DIAMOND SP | S | ||
| Brake Fluid | N/A | N/A | DOT 3 or DOT 4 Brake Fluid | As required. | S | ||
| Differential Gear Oil | Rear | 0.90 QTS. | 0.85 L | API - GL-5, SAE 90W, 85W-90 or 80W-90 (Above -10Deg.F) | S | ||
| Engine Coolant | 7.40 QTS. | 7 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | Includes: .69 qt. in reserve tank. | S | ||
| Engine Oil | Turbocharger | w/Filter | 5.00 QTS. | 4.73 L | API - SAE 5W-30 | S | |
| Engine Oil | Turbocharger | w/o Filter | 4.50 QTS. | 4.25 L | API - SAE 5W-30 | S | |
| Engine Oil | Turbocharger | w/Oil Cooler | 5.00 QTS. | 4.73 L | API - SAE 5W-30 | S | |
| Fuel Tank | 16.00 GALS. | 60.56 L | S | ||||
| Manual Transmission Fluid | FWD,Turbocharger | 2.10 QTS. | 1.98 L | API - GL-4 or higher, SAE 75W-90, 75W, 85W | S | ||
| Power Steering Fluid | 0.95 QTS. | 0.89 L | Automatic Transmission Fluid DEXRON II | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.