WHEEL ALIGNMENT SPECIFICATIONS (ECLIPSE)

Application

Preferred

Range

1.8L

Camber ⁽¹⁾

Front

0.23

-0.27 To 0.73

Rear

-0.75

-1.25 To -0.25

Caster ⁽¹⁾

2.33

1.83 To 2.83

Toe-In ⁽²⁾

Front & Rear

0 (0)

-0.12 To 0.12 (-3 To 3)

2.0L

FWD

Camber ⁽¹⁾

Front

0.08

-0.03 To 0.11

Rear

-0.75

-1.25 To -0.25

Caster ⁽¹⁾

2.4

1.9 To 2.9

Toe-In ⁽²⁾

0 (0)

-0.12 To 0.12 (-3 To 3)

AWD

Camber ⁽¹⁾

Front

0.17

-0.33 To 0.67

Rear

-1.55

-2.05 To -1.05

Caster ⁽¹⁾

2.3

1.8 To 2.8

Toe-In ⁽²⁾

Front

0 (0)

-0.12 To 0.12 (-3 To 3)

Rear

0.14 (3)

-0.02 To 0.26 (0.5 To 6.5)

⁽¹⁾	Measurement in degrees.

⁽²⁾	Measurement in inches (mm).

WHEEL ALIGNMENT SPECIFICATIONS (GALANT)

Application

Preferred

Range

Camber ⁽¹⁾

Front

-0.50 To 0.50

Rear

1.33

-.66 To 1.83

Caster ⁽¹⁾

4.33

2.83 To 5.83

Toe-In ⁽²⁾

Front

0 (0)

-0.12 To 0.12 (-3 To 3)

Rear

.12 (3)

0 To .24 (0 To 6)

⁽¹⁾	Measurement in degrees.

⁽²⁾	Measurement in inches (mm).

WHEEL ALIGNMENT SPECIFICATIONS (PRECIS)

Application

Preferred

Range

Camber ⁽¹⁾

Front

-0.5 To 0.5

Rear

-0.67

N/A

Caster ⁽¹⁾

With P/S

1.67

1.17 To 2.17

Without P/S

1.03

0.53 To 1.53

Toe-In ⁽²⁾

Front

0.04 (1)

-0.08 To 0.16 (-2 To 4)

Rear

0.06 (1.5)

-012 To 0.23 (3 To 6)

Toe-Out On Turns ⁽¹⁾

Inner

37.4

N/A

Outer

31.52

N/A

⁽¹⁾	Measurement in degrees.

⁽²⁾	Measurement in inches (mm).

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Wheel Alignment Specifications

Use the Manual With the Right Hardware

When to See a Mechanic