WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

GENERAL SPECIFICATIONS

Item		Specification
Master cylinder	Type	Tandem type
Master cylinder	I.D. mm (in)	23.81 (0.94)
Brake booster	Type	Vacuum type, single
	Effective dia. of power cylinder mm (in)	252 (10)
	Boosting ratio	5.5 {Pedal depression force: 663 N (149 lb)}
Front brakes	Type (Disk brake nomenclature)	Brembo™ 4-opposed-piston ventilated disk (V8-Z4046)
	Disk effective dia x thickness mm (in)	294 x 32 (11.6 x 1.3)
	Cylinder I.D. mm (in)	40.0 (1.58) x 2, 46.0 (1.81) x 2
	Brake pad thickness mm (in)	9.85 (0.39)
	Clearance adjustment	Automatic adjustment
Rear brakes	Type (Disk brake nomenclature)	Brembo™ 2-opposed-piston ventilated disk (V7-X40)
	Disk effective dia x thickness mm (in)	278 x 22 (10.9 x 0.9)
	Cylinder I.D. mm (in)	40.0 (1.58) x 2
	Brake pad thickness mm (in)	9.0 (0.35)
	Clearance adjustment	Automatic adjustment
Brake fluid		DOT3 or DOT4

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

General Specifications

Use the Manual With the Right Hardware

When to See a Mechanic