1983 Mitsubishi Starion BaseFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Differential Gear Oil 2.6L Eng 1.40 QTS. 1.32 L API - Classification GL-4, GL-5, SAE 90W S
Engine Coolant 2.6L Eng 9.70 QTS. 9.17 L 50/50 mixture of High quality ethylene-glycol antifreeze and water S
Engine Oil 2.6L Eng w/Filter 4.30 QTS. 4.06 L SAE 5W-30 (Below -20Deg.F to 60Deg.F), 10W-30 (-10Deg.F to Above 100Deg.F) S
Engine Oil 2.6L Eng w/o Filter 3.80 QTS. 3.59 L SAE 5W-30 (Below -20Deg.F to 60Deg.F), 10W-30 (-10Deg.F to Above 100Deg.F) S
Fuel Tank 2.6L Eng 19.80 GALS. 74.95 L S
Manual Transmission Fluid 2.6L Eng 2.40 QTS. 2.27 L API - Classification GL-4 SAE 80W, 75W-85W S
Power Steering Fluid 2.6L Eng 1.12 QTS. 1.05 L Automatic Transmission Fluid DEXRON II S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.