Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2021 Mini Cooper Countryman ALL4FACTORY OEM SERVICE PROCEDURE
Fuel System -- Repair Cooper Countryman (F60)
- 13 31 Fuel Pressure Check, Fuel Supply Line
- 13 51 High-Pressure Pump
- 13 53 Fuel Injectors, Fuel Rail, Fuel Line, Pressure Sensor
- Clean the cylinder head in the area of the injectors with sandy/dusty contamination (Countryman 2017-2023, except PHEV)
- 13 53 156 Remove and install high-pressure rail (Countryman base FWD, Countryman base ALL4 AWD)
- 13 53 180 Replace pressure line (between high pressure pump and pressure accumulator) (Countryman 2017-2023, except PHEV)
- 13 53 318 Remove and install all injectors in the injection system (Countryman base FWD, Countryman base ALL4 AWD)
- 13 53 596 Replacing fuel high-pressure sensor (after vehicle diagnosis) (Countryman base FWD, Countryman base ALL4 AWD)
- 13 53 156 Remove, and install high-pressure rail (Countryman S FWD, Countryman S ALL4 AWD, Countryman JCW ALL4 AWD)
- 13 53 318 Remove and install all injectors in the injection system (Countryman S FWD, Countryman S ALL4 AWD, Countryman JCW ALL4 AWD)
- 13 53 596 Replacing fuel high-pressure sensor (after vehicle diagnosis) (Countryman S FWD, Countryman S ALL4 AWD, Countryman JCW ALL4 AWD)
- 13 54 Throttle Body
- 13 62 Engine Sensors
- 13 62 537 Replace coolant temperature sensor (at coolant radiator) (after vehicle diagnosis) (Countryman 2017-2023, except PHEV)
- 13 62 560 Remove and install/replace hot film air mass meter (after vehicle diagnosis) (Countryman 2017-2023, except PHEV)
- 13 62 590 Replacing the pressure sensor (after vehicle diagnosis) (before throttle valve) (Countryman 2017-2023, except PHEV)
- 13 62 591 Replacing the pressure sensor (after vehicle diagnosis) (after throttle valve) (Countryman 2017-2023, except PHEV)
- 13 62 596 Replacing the differential pressure sensor for the gasoline particulate filter (after vehicle diagnosis) (Countryman base FWD, Countryman base ALL4 AWD)
- 13 62 679 Replacing temperature sensor for oil/coolant (for 3rd cylinder on the crankcase) (after vehicle diagnosis) (Countryman base FWD, Countryman base ALL4 AWD)
- 13 62 531 Replace coolant temperature sensor (after vehicle diagnosis) (Countryman S FWD, Countryman S ALL4 AWD, Countryman JCW ALL4 AWD)
- 13 62 596 Replacing the differential pressure sensor for the gasoline particulate filter (after vehicle diagnosis) (Countryman S FWD, Countryman S ALL4 AWD, Countryman JCW ALL4 AWD)
- 13 62 679 Replacing temperature sensor for oil/coolant (for 3rd cylinder on the crankcase) (after vehicle diagnosis) (Countryman S FWD, Countryman S ALL4 AWD, Countryman JCW ALL4 AWD)
- 13 71 Intake Silencer
- 13 71 000 Remove and install intake filter housing (Countryman 2017-2023, except PHEV)
- 13 71 031 Replace intake manifold for intake filter housing (Countryman 2017-2023, except PHEV)
- 13 71 035 Removing and installing/replacing clean air pipe (Countryman base FWD, Countryman base ALL4 AWD)
- 13 71 035 Removing and installing/replacing clean air pipe (Countryman S FWD, Countryman S ALL4 AWD, Countryman JCW ALL4 AWD)
- 13 72 Engine Air Filter
- 13 90 EVAP Canister Purge Valve
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.