Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2019COOPER BASE, 2D CONVERTIBLE, AUTOMATIC TRANSREPAIR AND DIAGNOSISENGINE PERFORMANCEFUEL DELIVERYFUEL SYSTEM - REPAIR (F57)
2019 Mini Cooper Base, 2D Convertible, Automatic Trans
Fuel System - Repair (F57)
2019 Mini Cooper Base, 2D Convertible, Automatic TransSECTION Fuel System - Repair (F57)
- 13 31 Fuel Delivery Pressure Check
- 13 51 High-Pressure Pump
- 13 53 Fuel Injectors, Fuel Rail, Fuel Line, Pressure Sensor
- Clean the cylinder head in the area of the injectors with sandy/dusty contamination (Cooper)
- Removing and installing/replacing feed line (B36, B38) (Cooper)
- Removing and installing/replacing rail (B36, B38) (Cooper)
- Removing and installing/replacing pressure line between rail and high pressure pump (Cooper)
- Remove and install all injectors in the injection system (Cooper)
- Removing and installing/replacing all injectors (B36, B38) (Cooper)
- Replacing the rail pressure sensor (B36, B38) (Cooper)
- Removing and installing/replacing feed line (B48, B46) (Cooper S)
- Removing and installing/replacing rail (B48, B46) (Cooper S)
- Remove and install all injectors in the injection system (Cooper S)
- Removing and installing/replacing all injectors (B48, B46) (Cooper S)
- Replacing the rail pressure sensor (B48, B46) (Cooper S)
- 13 54 Throttle Body
- 13 62 Coolant Temperature Sensor, Mass Airflow Sensor, Boost Pressure Sensor
- 13 71 Intake Silencer
- Removing the acoustic cover (B36, B38, B46, B48) (Cooper)
- Remove and install intake filter housing (Cooper)
- Removing and installing/replacing intake silencer housing (Cooper)
- Remove intake manifold for intake filter housing (Cooper)
- Remove clean air pipe (B36, B38) (Cooper)
- Remove clean air pipe (B48, B46) (Cooper S)
- 13 72 Engine Air Filter
- 13 90 EVAP Canister Purge Valve
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.