SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2019COOPER BASE, 2D CONVERTIBLE, AUTOMATIC TRANSREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCEENGINE CONTROL SYSTEMSENGINE - TIGHTENING TORQUES (F57)1122 FLYWHEEL
2019 Mini Cooper Base, 2D Convertible, Automatic Trans

1122 Flywheel

2019 Mini Cooper Base, 2D Convertible, Automatic TransSECTION 1122 Flywheel

B36 ENGINE (COOPER BASE): 

TIGHTENING TORQUE SPECIFICATION (FLYWHEEL)

  Type Thread Tightening specifications Dimension
1AZ Hexagon bolts Flywheel to crankshaft B32, B36, B38 M12
Replace screws.
Joining torque and tightening torque must be observed without fail.		 1. Tightening torque
2. Angle of rotation		 45 Nm
45°

B46 AND B48 ENGINES (COOPER S AND JCW): 

11 22 FLYWHEEL - TIGHTENING TORQUE SPECIFICATION

  Type Thread Tightening specifications Dimension
1AZ Hexagon bolts
Flywheel to crankshaft		 B42, B46, B48 M12x1.5
Replace screws.
Joining torque and tightening torque must be observed without fail.		 Tightening torque
Angle of rotation		 45 Nm
45°
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.