2017 Mini Cooper Base, 2D Convertible, Automatic TransFACTORY OEM SERVICE PROCEDURE

Brake Fluid Level Switch: Notes

NOTE: Formerly, the brake fluid level switch was integrated in the sealing cap.
Now, the brake fluid level switch is integrated horizontally in the expansion tank.

The brake fluid level switch can be replaced separately.

The brake fluid level switch sends a signal to the Dynamic Stability Control (DSC). On the brake fluid expansion tank there is a maximum mark and a minimum mark.

The brake fluid falls within the scope of the Condition Based Service (CBS).

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.