2017 Mini Cooper Base, 2D Convertible, Automatic TransFACTORY OEM SERVICE PROCEDURE

Functional description

The alternator maintains the desired level of vehicle voltage. The alternator also supplies all electrical consumer units during driving. The controller regulates the output voltage of the electrically excited alternator with uncontrolled rectifier by applying the excitation current.

G11650587Courtesy of BMW OF NORTH AMERICA, INC.

Example

Item Explanation
1 Alternator
2 Positive battery cable
3 2-pin plug-in connection (1 pin used)

For the alternator with serial data interface, the following functions are implemented in the engine control unit:

  • Switching the alternator on and off on the basis of defined parameters
  • Temperature-dependent maximum permitted power consumption of the alternator
  • Calculation of the alternator input torque and the alternator current based on the parameters transmitted by the alternator regulator.
  • Control of the reaction of the alternator with addition of high power consumers (load-response function)
  • Alternator diagnosis and diagnosis of the data line between alternator and engine control unit.
  • Storage of any faults that occur on the alternator in the fault memory of the engine control unit


The alternator maintains the desired level of vehicle voltage. The alternator also supplies all electrical consumer units during driving. The controller regulates the output voltage of the electrically excited alternator with uncontrolled rectifier by applying the excitation current.

G09841203Courtesy of BMW OF NORTH AMERICA, INC.

Example

Item Explanation
1 Alternator
2 Regulator with rectifier diodes
3 2-pin plug-in connection (1 pin used)
4 Positive battery cable

For the alternator with serial data interface, the following functions are implemented in the engine control unit:

  • Switching the alternator on and off on the basis of defined parameters
  • Temperature-dependent maximum permitted power consumption of the alternator
  • Calculation of the alternator input torque and the alternator current based on the parameters transmitted by the alternator regulator.
  • Control of the reaction of the alternator with addition of high power consumers (load-response function)
  • Alternator diagnosis and diagnosis of the data line between alternator and engine control unit.
  • Storage of any faults that occur on the alternator in the fault memory of the engine control unit
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.