2017 Mini Cooper Base, 2D Convertible, Automatic TransFACTORY OEM SERVICE PROCEDURE

Adjustment Drive: Notes

The adjustment drive for exterior mirror adjustment is integrated into the exterior mirror. The adjustment drive has the capability to carry out horizontal and vertical exterior mirror adjustments.

NOTE: The correct installation location can be called up via the hotspot on the diagnosis wiring diagram!

The switch block in the driver's door activates the adjustment drive.

Depending on the version of the exterior mirror, the driver's door switch block activates the adjustment drive via signal lines or the LIN bus.

NOTE: Observe the diagnosis wiring diagram!

An adjustment drive consists basically of following parts:

  • 2-section housing (one fixed and one movable housing section)
  • Electric motor with transmission for horizontal adjustment
  • Electric motor with transmission for vertical adjustment
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.