2017 Mini Cooper Base, 2D Convertible, Automatic TransFACTORY OEM SERVICE PROCEDURE

1114 Housing Cover

B36 ENGINE (COOPER BASE): 

TIGHTENING TORQUE SPECIFICATION (HOUSING COVER)

  Type Thread Tightening specifications Dimension
1AZ Timing case cover to front crankcase B32S15M0/B38M0/U0/B36M0 M6   8 Nm
2AZ Timing case cover to rear crankcase B32S15M0/B38M0/U0/B36M0 M6
Replace screws.
Joining torque
Angle of rotation
8 Nm
90°

B46 AND B48 ENGINES (COOPER S AND JCW): 

11 14 HOUSING COVER - TIGHTENING TORQUE SPECIFICATION

  Type Thread Tightening specifications Dimension
1AZ Timing case cover to crankcase B42S2000/B46M0/O0/B48M0/O0 M6 Replace screws
Joining torque
Angle of rotation
8 Nm
90°
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.