2012 Mini Cooper Base, 2D Hatchback, Automatic TransFACTORY OEM SERVICE PROCEDURE

86 10 ... Replacing License Plate Light

WARNING: This page is about a different car, the 2008 BMW Alpina and 2007 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1) and remove license plate light (2) from mounting.

Fig 1: Identifying License Plate Light
G04766436Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect flat connector (1) in direction of arrow.

Fig 2: Disconnecting Flat Connector
G04766437Courtesy of BMW OF NORTH AMERICA, INC.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.