Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
86 10 ... Adjusting Spring Force Accumulator
The spring force accumulator requires no maintenance and generally does not need to be readjusted.
Adjustment dimension, spring force accumulator: distance between end of support tube - internal washer (1) is 90 mm.
To tension spring force accumulator: turn nut (2) located in support tube (1) clockwise.
To relieve tension on spring force accumulator: turn nut (2) located in support tube (1) counterclockwise.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.