Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Body Control Module (BC1): Notes
The BC1, similar in operation to the BMW General Module, controls several systems on the MINI. It is connected to the K-Bus to allow sub-systems to communicate with other systems and to enable diagnostic communication with the sub-systems.
The BC1 is located at the base of the A Pillar on the right hand side of the vehicle. It utilizes four (4) connections: one 20-pin connection and three (3) 54-pin connections.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.