2004 Mini Cooper Base, StandardFACTORY OEM SERVICE PROCEDURE

Roll Over

The MRS system does not specifically detect roll over conditions, but if as a consequence of the crash situation the system front or side trigger thresholds are exceeded, the relevant airbags and front seat belt pre-tensioners are deployed.

Fig 1: Passenger Side Airbag Deployment
G04724634Courtesy of BMW OF NORTH AMERICA, INC.

Workshop Hint 

After repair of damage caused by a collision in which the airbag(s) did not deploy, the integrity of the MRS system must be checked using GT1.

Workshop Hint 

Following deployment of the MRS within the vehicle, under any circumstances, all system components must be replaced.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.