Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Wheel Alignment Data (M32 01 08)
Reference number: M32 01 08
WHEEL ALIGNMENT DATA
TECHNICAL SERVICE BULLETIN
| MINI: | All |
| GROUP: | Steering and Wheel Alignment |
SUBJECT
Wheel Alignment Data
INFORMATION
The need to perform a wheel alignment is generally dictated by a component replacement, such as a steering gear, or to address a customer complaint related to a vehicle's handling characteristics.
Many wheel alignment machines use a multicolored display to indicate alignment measurements, such as camber and toe. Some machines will display a reading in a red font to indicate that an adjustment is recommended. However, a red display in and of itself does not indicate that the vehicle falls outside of the alignment specifications. Since many of the alignment specifications include a tolerance or variation, always refer to the alignment specifications in the Repair Manual.
Please note that brand new vehicles and vehicles which have been suspended on a lift may exhibit some deviation from nominal specifications, due to the fact that the suspension has not fully settled.
WARRANTY INFORMATION
For information only.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
