Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Idle Speed Control
Idle Speed is controlled by the EMS2000 and EDR without the aid of an idle speed motor.
For smooth driveability of the vehicle, the engine speed should remain constant when at idle no matter what the varying loads may be on the engine. The driver should not detect a fluctuation in engine idle speed under the following conditions:
- Engine cold start (increase in idle speed setting).
- Switching of different electrical loads (e.g. headlights, HRW or HFS).
- Turning the steering wheel to full lock (increased load from the Electro Hydraulic Power Steering (EHPS pump)).
- Air Conditioning Compressor engagement.
When there is a rapid change in electrical power demand on the alternator ie. front and rear heated windshield on with air conditioning fully on, there will be a corresponding rapid increase in the mechanical loading that the alternator exerts upon the engine. This in turn will have a significant effect on the engine idle speed stability. There is a delay between the electrical demand being made on the alternator and the mechanical demand being made on the engine. During this period of time the alternator transmits a signal to the EMS2000 to inform the control unit of the change in electrical load. The signal is PWM and allows the EMS2000 to control the throttle demand at idle to prevent flares and dips in the engine speed due to alternator loading or unloading.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.