2002 Mini Cooper Base, StandardFACTORY OEM SERVICE PROCEDURE

Radio Control Unit Video Module/Navigator Interface X1532 Connector End View

Fig 1: Radio Control Unit Video Module/Navigator Interface X1532 Connector End View
G11234832Courtesy of BMW OF NORTH AMERICA, INC.
Pin Assignments At Plug Connector X1532

Pin Type Description /Signal type Connection /Measuring notes
1   Not used  
2   Not used  
3   Not used  
4   Not used  
5 A Positive activation Video module Navigation computer Japan Video module control unit
6 A Telephone speaker Positive activation Eject box
7   Not used  
8   Not used  
9   Not used  
10   Not used  
11 E Negative activation Video module Navigation computer Japan Video module control unit
12 E Telephone speaker Negative activation Eject box
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.