Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

2002 Mini Cooper Base, Automatic CVTFACTORY OEM SERVICE PROCEDURE

Enabling Code Information (M09 02 11)

Publication date: 2013-07-01
Reference number: M09 02 11

ENABLING CODE INFORMATION

TECHNICAL SERVICE BULLETIN

Reference Number(s): SI M09 02 11, Date of Issue: July 2013

MINI:	All
GROUP:	Programming/Coding Explanations

Superceded Bulletin(s): SI M09 02 11, Date of Issue: May 2013

SERVICE INFORMATION

NOTE: This Service Information bulletin supersedes SI M09 02 11 dated May 2013.

SUBJECT

Enabling Code Information

SITUATION

When ISTA/P requests an enabling code during a programming session, only an Application ID and Upgrade Index are shown. The Workshop Technology website on Centernet (use "Multi-Search" for "Workshop Technology") has a linked cross-reference sheet which will help identify which enabling code is required.

For further information on the use of enabling codes, refer to SI M09 01 11.

Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready Tools Compare Repair Quote Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.