Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2002 Mini Cooper Base, Automatic CVTFACTORY OEM SERVICE PROCEDURE
GT1 Troubleshooting: Printer
PRINTER - TROUBLESHOOTING CHART
| Symptom | Possible Causes | Remedy |
|---|---|---|
| Local Printer does not print | Printer connected to docking station, control panel undocked. | Dock the control panel or insert the USB cable on the printer in the control panel. Check that the connection is correctly seated. |
| Printer is defective. | In the "Administration" window, press the "Self-test" button and select the "Printer connection" function from the menu displayed. The printer should print a page with the heading "PS". If this does not occur, check the cable connection to the printer. | |
| Network Printer does not print. | Network printer connected via LAN cable to docking station; control panel undocked. | Dock the control panel. |
| Radio link to diagnostic head established | Disconnect the cable connection to the diagnostic head and established a connection to the network printer in accordance with Section 4.4.8. | |
| Cable link to diagnostic head established. | Disconnect the cable connection to the diagnostic head and established a connection to the network printer in accordance with Section 4.4.8. | |
| Printer Defective. | In the "Administration" window, press the "self-test" button and select the "printer connection" function from the menu displayed. The printer should print a page with the heading "PS". If this does not occur, chack whether the correct IP address for the printer is entered in the "Administration - Network configuration" window. |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.