1989 Merkur Scorpio AutomaticFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Automatic Transmission Fluid 18.50 PTS. 8.75 L Automatic Transmission Fluid MERCON S
Brake Fluid N/A N/A DOT 3 Brake Fluid S
Differential Gear Oil Rear 2.80 PTS. 1.32 L Rear Axle Gear Oil S
Engine Coolant w/Heater 9.00 QTS. 8.51 L 50/50 mixture of FORD Premium Cooling System Fluid and water S
Engine Oil 2.9L Eng w/Filter Change 5.00 QTS. 4.73 L SAE 5W-30 (Preferred) (Below -20Deg.F to 100Deg.F), 10W-30 (0Deg.F to Above 100Deg.F) S
Fuel Tank 16.90 GALS. 63.97 L S
Manual Transmission Fluid 2.60 PTS. 1.23 L Merkur Synthetic Manual Transmission Fluid S
Power Steering Fluid 1.60 PTS. 0.75 L Automatic Transmission Fluid MERCON S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.