Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Mercury Sable Base, FWDFACTORY OEM SERVICE PROCEDURE
In-Vehicle Temperature Sensor: Notes
WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Part Number | Description |
|---|---|---|
| 1 | 19C734 | In-vehicle temperature sensor |
| Item | Part Number | Description |
|---|---|---|
| 1 | W707628 | Lower steering column cover screw (3 required) |
| 2 | 7404459 | Lower steering column cover |
| 3 | W707281 | Lower steering column shroud screw (3 required) |
| 4 | - | Lower steering column shroud |
| 5 | 19C734 | In-vehicle temperature sensor |
| 6 | - | In-vehicle temperature sensor electrical connector (part of 14401) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.