2009 Mercury Sable Base, FWDFACTORY OEM SERVICE PROCEDURE

Occupant Classification Sensor - Service Kit: Notes

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools

Illustration Tool Name Tool Number
GF0000049Courtesy of FORD MOTOR CO.
Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate hardware, or equivalent scan tool
Fig 1: Occupant Classification Sensor - Service Kit With Torque Specification (1 Of 2)
GF0041975Courtesy of FORD MOTOR CO.
Item Part Number Description
1 - Seat cushion assembly
2 - Electrical connectors (part of 603B02)
3 - Seat cushion bolts
Fig 2: Exploded View Of Occupant Classification Sensor - Service Kit - (2 Of 2) With Torque Specifications
GF0024009Courtesy of FORD MOTOR CO.
Item Part Number Description
4 62900 Seat cushion trim cover
5 603B02 Occupant Classification Sensor (OCS) assembly
6 - Seat cushion pan
7 - Pressure sensor (part of 603B02)
8 - Occupant Classification System Module (OCSM) (part of 603B02)
9 391950 OCSM rivets (2 required) (part of 603B02)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.