Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Mercury Sable Base, FWDFACTORY OEM SERVICE PROCEDURE
Torque Specifications
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Fuel pump (FP) module shield nuts | 9 | - | 80 |
| Fuel tank filler pipe bracket bolt | 9 | - | 80 |
| Fuel tank filler pipe hose clamp | 3 | - | 27 |
| Fuel tank filler pipe retaining screws | 3 | - | 27 |
| Fuel tank strap bolts | 35 | 26 | - |
| Fuel tube bundle retainer bolt | 20 | 15 | - |
| Inertia fuel shutoff (IFS) switch bolts | 12 | 9 | - |
| Load floor support-to-floor pan nuts | 18 | 13 | - |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
