Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Torque Specifications
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Air Cleaner (ACL) assembly bracket bolts | 11 | - | 97 |
| ACL outlet pipe clamp | 5 | - | 44 |
| Auxiliary coolant pump nuts | 20 | - | 177 |
| Battery tray bolt | 9 | - | 80 |
| Battery tray nut | 9 | - | 80 |
| Catalytic converter nuts | 40 | 30 | - |
| Catalytic converter support bracket bolts | 20 | - | 177 |
| Driveshaft bolts | 70 | 52 | - |
| Exhaust flange nuts | 40 | 30 | - |
| Exhaust Y-pipe assembly nuts | 40 | 30 | - |
| Halfshaft bearing support bracket nuts | 40 | 30 | - |
| Halfshaft nuts | 350 | 258 | - |
| Line pressure tap plug | 9 | - | 80 |
| Main control cover bolt and stud bolta | - | - | - |
| Manual control lever nut | 18 | - | 159 |
| Output Shaft Speed (OSS) sensor bolt | 12 | - | 106 |
| Power steering rack bolts and nuts | 117 | 86 | - |
| Power steering tube bracket bolt | 9 | - | 80 |
| PTU support bracket bolts | 70 | 52 | - |
| Power Transfer Unit (PTU)-to-transaxle bolts | 90 | 66 | - |
| Roll restrictor bolts | 90 | 66 | - |
| Selector lever cable bracket bolts | 12 | - | 106 |
| Solenoid body boltsa | - | - | - |
| Stabilizer bar bracket bolts | 48 | 35 | - |
| Starter battery terminal nut | 12 | - | 106 |
| Starter bolt | 26 | 19 | - |
| Starter solenoid terminal nut | 6 | - | 53 |
| Starter studbolt | 26 | 19 | - |
| Steering knuckle-to-lower control arm ball joint nuts | 115 | 85 | - |
| Subframe bolts | 150 | 111 | - |
| Subframe support bracket bolts | 55 | 41 | - |
| Thermal bypass valve nuts | 9 | - | 80 |
| Torque converter bolts | 55 | 41 | - |
| Torque converter housing bolts | 48 | 35 | - |
| Transaxle support insulator bolts | 55 | 41 | - |
| Transaxle support insulator bracket nuts | 63 | 46 | - |
| Transaxle support insulator through bolt | 175 | 129 | - |
| Transmission fluid cooler tube fitting | 25 | 18 | - |
| Transmission fluid cooler tube bolt | 9 | - | 80 |
| Transmission fluid cooler tube nut | 25 | 18 | - |
| Transmission fluid cooler tube-to-transaxle case bolts | 9 | - | 80 |
| Transmission fluid drain plug | 9 | - | 80 |
| Transmission fluid filler tube nut | 11 | - | 97 |
| Transmission Range (TR) sensor detent spring boltsa | - | - | - |
| Turbine Shaft Speed (TSS) sensor bolt | 12 | - | 106 |
a Refer to the appropriate procedure.
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.