Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2009 Mercury Milan Premier, 3.0 1, AWDFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 6.00 OZS. | 0.17 L | YN-12-D | S | |||
| Air Cond Refrigerant | 1.30 LBS. | 0.58 KG | R-134a | S | |||
| Automatic Transmission Fluid | 6 Spd Trans | 7.40 QTS. | 7 L | MOTORCRAFT Premium Automatic Transmission Fluid | Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. | S | |
| Brake Fluid | N/A | N/A | MOTORCRAFT High Performance DOT 3 Motor Vehicle Brake Fluid | Fill to line on reservoir. | S | ||
| Differential Gear Oil | AWD | Rear | 2.40 PTS. | 1.13 L | SAE 80W-90 Premium Rear Axle Gear Oil | S | |
| Engine Coolant | 3.0L Eng | 9.72 QTS. | 9.19 L | FORD Premium Gold Engine Coolant w/bittering agent | Add the coolant type originally equipped in the vehicle. | S | |
| Engine Oil | 3.0L Eng | w/Filter | 6.00 QTS. | 5.67 L | SAE 5W-20 Premium Synthetic Blend Motor Oil | Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only to meet the requirements of FORD Specification: WSS-M2C930-A and the API Certification mark. | S |
| Fuel Tank | AWD | 16.50 GALS. | 62.45 L | S | |||
| Manual Transmission Fluid | 3.00 QTS. | 2.83 L | SAE 75W-90 Gear Oil (non-synthetic) | Service refill capacity is determined by filling the Transmission to the bottom of the filler hole with the vehicle on a level surface. | S | ||
| Power Steering Fluid | N/A | N/A | MOTORCRAFT Automatic Transmission Fluid MERCON V | Fill between "max" and "min" lines on reservoir. | S | ||
| Transfer Case Fluid | Power Transfer Unit | 0.35 QTS. | 0.33 L | SAE 75W-140 Synthetic Axle Gear Oil | The Power Transfer Unit is lubricated for life with synthetic lube. Lubricant levels are not to be checked or changed unless a leak is suspected or repair required. Replace Power Transfer Unit lubricant with specified synthetic lubricant anytime the unit is submerged in water. | S | |
| Windshield Washer Fluid | 4.75 QTS. | 4.49 L | MOTORCRAFT Premium Windshield Washer Concentrate Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.