2007 Mercury MontereyFACTORY OEM SERVICE PROCEDURE

Lower Intake Manifold: Notes

Material

Item Specification
Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (US); Motorcraft SAE 5W-20 Super Premium Motor Oil
CXO-5W20-LSP12 (Canada); or equivalent
WSS-M2C930-A
Silicone Gasket and Sealant
TA-30
WSE-M4G323-A4
Motorcraft Metal Surface Cleaner
ZC-21
WSE-M5B392-A
Fig 1: Exploded View Of Lower Intake Manifold
GF0033015Courtesy of FORD MOTOR CO.
Item Part Number Description
1 18472 Heater hose
2 18472 Heater hose
3 8287 Upper radiator hose clamp
4 8260 Upper radiator hose
5 12B637 Intake manifold runner control (IMRC) electrical connector
6 W701568 Lower intake manifold bolt (short, 8 required)
7 W701569 Lower intake manifold bolt (long, 6 required)
8 9424 Lower intake manifold
9 9439 RH lower intake manifold gasket
10 9439 LH lower intake manifold gasket
11 9A424 Lower intake manifold rear seal
12 9A425 Lower intake manifold front seal
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.